此页面上的内容需要较新版本的 Adobe Flash Player。

获取 Adobe Flash Player

栏目导航
机电一体化解决方案
流体处理解决方案
气动液压
工业控制及电气自动化
传动机械
工具仪器仪表
您现在的位置:上海杰鸥科工贸有限公司  > 工具仪器仪表 > 工具仪器仪表 > DELTA电源
Delta manufactures power units which today are an integral component in equipment found all over the world. The power supply is a minor part of any equipment and often taken for granted. For many it is just the electronic `box` and usually ordered at the last moment. At the same time any power supply will be expected to supply the demands of the equipment it is driving. An ongoing research programme has resulted in production designs that can meet an ever increasing number of specifications. Tracking Mode, Master-Slave Configuration, Active PFC, Clean Current, Low Ripple are terms frequently used to describe our units. Delta produces world class DC power supplies.
SM-Series 3300 Watt, 19" 2 U
  •  19" Precision bench power supplies, Primary switch mode, for universal use
    19" 3 U rack or desktop model
    Protected against all overload and short circuit conditions
    Efficiency up to 90 %
    Accuracy 0,01 %
    Very low Ripple
    U and I programmable, 16bit Ethernet interface standard
    Optional Interfaces: PROFIBUS, CANBUS, RS232, IEEE488, Isolated Analog Interface and Master/Slave Controller
    Sequencer and stand-alone automation standard
    USB output for exchange of settings and waveforms
    Parallel and Series operation
    Desktop case and complete systems up on request
    Shipment possible from 2nd quarter
  • SM-Series 800 Watt, 1/2 19''
  •  1/2 19" Precision bench power supplies,Primary switch mode, for universal use
    1/2 19“ rack or desktop model
    Protected against all overload and short circuit conditions
    Efficiency up to 87 %
    Accuracy 0,01 %
    U and I programmable 0-5 V, 0-10 V optional
    Very low Ripple
    Parallel and Series operation
    Desktop case and complete systems with interface
    IEEE488 / RS-232 optional
  • SM-Series 1500 Watt, 19'' 2 U
  •  19" Precision bench power supplies, Primary switch mode, for universal use
    19“ 2 U rack or desktop model
    Protected against all overload and short circuit conditions
    Efficiency up to 87 %
    Accuracy 0,01 %
    U and I programmable 0-5 V, 0-10 V optional
    Very low Ripple
    Parallel and Series operation
    Desktop case and complete systems with interface IEEE488 / RS-232 optional
  • SM-Series 3000 Watt, 19'' 3 U
  •   19"Precision bench power supplies, Primary switch mode, for universal use
    19“ 3 U rack or desktop model
    Protected against all overload and short circuit conditions
    Efficiency up to 87 %
    Accuracy 0,01 %
    U and I programmable 0-5 V, 0-10 V optional
    Very low Ripple
    Parallel and Series operation
    Desktop case and complete systems with interface IEEE488 / RS-232 optional
  • SM-Series 6000 Watt, 19'' 4 U
  •   19" Precision bench power supplies, Primary switch mode, for universal use
    19“ 4 U rack or desktop model
    Protected against all overload and short circuit conditions
    Efficiency up to 87 %
    Accuracy 0,01 %
    U and I programmable 0-5 V, 0-10 V optional
    Very low Ripple
    Parallel and Series operation
    Desktop case and complete systems with interface IEEE488 / RS-232 optional
  • ES-Series 150/300 Watt
  •  Bench power supply, Primary switch mode
    Compact ½ 19"
    Rack or desktop model c
    U and I programmable 0-5 V
    IEEE488 / RS-232 optional
    Active PFC (Power Factor Control)
    Weight: 1.7 / 3.1 kg (300 Watt)
    Line connection: 98-264 V, 50/60 Hz
  • S-Series 280 Watt
  •  Euro Cassettes, Primary switch mode
    U and I programmable 0-5 V
    Low ripple
    Rack-, Railway or wall mounting
  • S-Series 240-1200 Watt
  •  Euro Cassette, Primary switch mode
    Output voltage adjustable or programmable
    Built-in redundant diode
    Rack- and wall mounting
  • PSC-ETH
  •  Computer-Interface Ethernet for ES- and SM-Series
    Interface between Ethernet IP Network and Power Supply
    IP-address can be configured by user, make use of existing networks
    16-bit accuracy for voltage and current programming or output monitoring
    Read-back of status signals, change power supply modes like: Remote/Local
    Digital user in- and outputs (isolated)
    Software Calibration
    SCPI commands
    Internal Card available for ES- and SM-Series
    External module for other power supplies
    Integrated Sequencer
    Power supply generates arbitrary waveforms, stored in sequencer
    Waveform generation independent of computer, stand-alone possible
    Very fast or slow sequences: time between steps from 1 ms till hours
    25 free programmable sequences each with 2000 steps
    Simulation of Battery voltage at engine start, Surges, Generators, etc.
  • PSC-488 / PSC-232 EXT

  •  Power Supply Controllers PSC-Series: PSC-488 EXT for IEEE488/RS-232 PSC-232 EXT for RS-232
    igital programming controllers for power supplies of ES/SM Series
    Programming and monitoring of voltage and current
    Status signals for CC-mode, limit
    Control signals for On/Off, Remote/Local, 14bit D/A and A/D converter
    Desktop model, easy mounting on 35 mm DIN rails or with 19" rack adapter
  • Iso-Amp-Module
  •  Iso-Amp-Module
    4-channel Isolation Amplifier Module
    Provides Galvanic Isolation when programming or monitoring Delta power supplies
    Solves many problems related to earth loops or common mode voltages
    Pin compatible with Delta programming connector
    One connecting cable supplied
  • Iso-Amp Card
  •  Iso-Amp Card
    4-channel Isolation Amplifier Module, Fits inside the SM-series
    Provides Galvanic Isolation when programming or monitoring Delta power supplies
    Solves many problems related to earth loops or common mode voltages
    Pin compatible with Delta programming connector
  • Master-Slave-Series Adapter
  •  Master/Slave
    Simple Master/Slave Series connection
    Compatibel for ES and SM-Series
    Linear voltage distribution
    Series connection up to 600 V total voltage
    One connecting cable supplied
  • Alarm cards
  •  Undervoltage and overvoltage signal
    Undervoltage and Overvoltage alarm, 2 voltages can be monitored simultaneously
    Isolated alarm contacts
    Undervoltage range 18–48 V
    Overvoltage range 24–64 V
  • Power Sink Option
  •  Current derating up to 700 Wpeak.
    Absorb 700 Watt peak power.
    Deal solution for supplying electric motors with PWM-speed control. Systems witch returning.
    power to the input of the power supply
    Ideal solution for ATE systems requiring fast down programming at no load conditions.
    Downward programming speed > 7 ms(without load)
    NEW Also as external modul available.
  • High Speed Option
  •  For SM800, SM1500, SM3000 und SM6000
    Programming speed 5-20 times faster than
    standard units: typ. 0,4 ms
    Min. overload change through lower output capacity
    Designed for high speed application, laser diodes and
    precision power sources
    Available for units of SM series 800-6.000 W
  • PSC-CAN, PSC-PB
  •  Computer-Interface CanOpen and Profibus OP for SM- and ES-Series
    Interface between CanOpen/Profibus OP Network and Power Supply
    14-bit accuracy for voltage and current programming or output monitoring
    Read-back of status signals, change power supply modes like: Remote Shut Down
    Software Calibration
    Internal Card available for ES- and SM-Series
  • SX-Series 150 Watt
  •  Euro Cassettes, Primary switch mode
    Variable Output voltage: adjustable or programmable
    Low ripple
    Universal mounting possibilities
    Line connection: 98-264 V, 50/60 Hz
  • 上海杰鸥科工贸有限公司 版权所有 严禁复制 2004-2012
    地址:上海莘庄雅致路215号置业大厦1406B 
    电话:(86)-21-54131016
    网站备案号:沪ICP备11038109号 网站制作|网站设计上海频道  沪公网安备 31011202003961号

     
    上海网站制作
    上海网站建设